讯海轴承/SKF/深沟球轴承/6011/HC5C3

SKF 6011/HC5C3 深沟球轴承 55×90×18 mm斯凯孚 · 瑞典

深沟球轴承 · 主要尺寸 55×90×18 mm

关键尺寸

55内径 d / mm
90外径 D / mm
18宽度 B / mm

资料下载

SKF 6011/HC5C3 技术参数

尺寸
孔径55 mm
外径90 mm
宽度18 mm
孔径55 mm
外径90 mm
宽度18 mm
内圈挡边直径66.3 mm
外圈挡边直径78.7 mm
外圈挡边凹槽直径81.5 mm
倒角尺寸1.1 mm
性能
基本额定动荷28.1 kN
基本额定静负荷21.2 kN
参考转速18000 r/min
极限转速11000 r/min
属性
注油槽不带
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架冲压钢
配对布置无
径向游隙C3
材料,轴承复合材料
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹1.2 kg CO<sub>2</sub>e
挡肩尺寸
轴挡肩直径61 mm
轴承座挡肩尺寸84 mm
倒角半径1 mm
数据计算
基本额定动荷28.1 kN
基本额定静负荷21.2 kN
疲劳载荷限值0.655 kN
参考转速18000 r/min
极限转速11000 r/min
计算系数0.025
计算系数15.4

产品说明

Hybrid ceramic single row deep groove ball bearings have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. Deep groove ball bearings are the most widely used bearing type, especially in electric motors. The ceramic rolling elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false brinelling, and less sensitivity to temperature gradients. These characteristics make them suitable for use in difficult conditions and contaminated environments. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF 6011/HC5C3 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF 6011/HC5C3 的主要尺寸相同(d 55 × D 90 × B 18 mm),可用于同尺寸替代选型。

同系列相近型号